Worth Data RF Terminal 7000 Especificaciones descargar pdf (Pagina 19)

UPC-E / EAN-8 Options

UPC-E First Digit ON OFF 1

EAN-8 First Digit ON OFF 2

UPC-E Check Digit ON OFF 3

EAN-8 Check Digit ON OFF 4

UPC-E Expanded ON OFF 5

UPC-E1 ON OFF 6

• Use setting 1 and 2 to enable or disable the UPC-E or EAN-8 first digit.

• Use setting 3 and 4 to enable or disable the UPC-E or EAN-8 check digit. The check digit is the last character

and is based upon a calculation performed on the other characters.

• Use setting 5 to select UPC-E0 compressed or expanded. When set to ON (the default setting) UPC-E1 codes

are transmitted as is, when set to OFF UPC-E1 codes are transmitted with inserted zeros to make them the

same length as a UPC-A bar code. An NSC of 0 is assumed.

• Use setting 6 to enable the reading of UPC-E1 bar codes. Do not enable UPC-E1 if you plan on reading EAN-

13 bar codes. You may experience partial reads when reading ENA-13.

• If you prefer to transmit UPC-E bar codes in a 6-digit format while EAN-8 is transmitted in its original 8-digit

format, set option 7 to ON.

Code 128

Code 128 ON OFF 1

UCC/EAN 128 ON OFF 2

• UCC/EAN-128 is a subset of Code 128 that follows certain specifications regarding character content, length

and check digits. Enabling UCC/EAN-128 (2) causes the RF Terminal to look for a Code 128 bar code that

begins with the Code 128 F1 (Function 1) character. See Appendix H: Code 128 for more details.

Codabar

Codabar ON OFF 1

Codabar CLSI ON OFF 2

Start Stop Character ON OFF 3

• CLSI is a form of Codabar often used by libraries.

• Setting 3 will transmit the Codabar start and stop characters with the bar code data to your computer. If you are

varying the start and stop characters to differentiate between different labels, transmitting the start and stop can be

helpful. See Appendix G; Codabar for more information.

2 of 5 Code

Interleaved 2 of 5 ON OFF 1

Check Digit ON OFF 2

Transmit Check Digit ON OFF 3

Standard 2 of 5 ON OFF 4

2 of 5 Code Length 06 5

• Setting 2 requires that the last digit in your bar code conform to the specifications for the 2 of 5 check digit

calculation. See Appendix I; 2 of 5 Code for more information.

• Transmission of the check digit (3) requires the use of setting 2 and will transmit the check digit along with the bar

code data to the computer.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 102 103

Sin comentarios

Worth Data RF Terminal 7000 Especificaciones Pagina 19