Worth Data RF Laser Especificaciones descargar pdf (Pagina 33)

2-18

• Scan up to seven 4-digit pairings where the first 2 digits represent the

hex number to replace and the second 2 digits represent the hex

number to insert. You can have up to seven character reassignments.

• Scan SET

You can eliminate the output of a character by using FF as the hex number to

insert. For example, if you wanted to eliminate all $, following the above

instructions, enter 24FF.

Beep Tone

Lowest 0

Low 1

Medium 2

High 3

Highest 4

No Beep Tone 5

Batteries

Alkaline Batteries 0

Rechargeables 1

• In order to get an accurate Battery Status reading; you must select the

correct battery type. If you ordered NiMH batteries (part number L01)

with the RF Terminal, this will be set to Rechargeable before shipping.

• If you didn't order re-chargeable batteries, this shipped setting is

Alkaline. Battery Status can be displayed by pressing the STATUS key

on the RF Terminal keypad.

• Before you can recharge the batteries, this parameter must be set to

Rechargeables. Don't try to recharge alkaline batteries. They might

explode. This will void your warranty.

• If you decide to use rechargeables after ordering the RF Terminal

without rechargeables included, you must change this setting allow

recharging.

Date Format

US Format 0

European Format 1

• The US format of mm/dd/yy is the default setting.

• If you switch formats, you must reset the date (SET DATE) in the new

format also.

ate/

Time

Speaker

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 154 155

Sin comentarios

Worth Data RF Laser Especificaciones Pagina 33